v8 Opcodes
Ops have a 'cost' of 1 unless otherwise specified.
err¶
- Bytecode: 0x00
- Stack: ... → exits
- Fail immediately.
sha256¶
- Bytecode: 0x01
- Stack: ..., A: []byte → ..., [32]byte
- SHA256 hash of value A, yields [32]byte
- Cost: 35
keccak256¶
- Bytecode: 0x02
- Stack: ..., A: []byte → ..., [32]byte
- Keccak256 hash of value A, yields [32]byte
- Cost: 130
sha512_256¶
- Bytecode: 0x03
- Stack: ..., A: []byte → ..., [32]byte
- SHA512_256 hash of value A, yields [32]byte
- Cost: 45
ed25519verify¶
- Bytecode: 0x04
- Stack: ..., A: []byte, B: [64]byte, C: [32]byte → ..., bool
- for (data A, signature B, pubkey C) verify the signature of ("ProgData" || program_hash || data) against the pubkey => {0 or 1}
- Cost: 1900
The 32 byte public key is the last element on the stack, preceded by the 64 byte signature at the second-to-last element on the stack, preceded by the data which was signed at the third-to-last element on the stack.
ecdsa_verify¶
- Syntax:
ecdsa_verify V
where V: ECDSA - Bytecode: 0x05 {uint8}
- Stack: ..., A: [32]byte, B: [32]byte, C: [32]byte, D: [32]byte, E: [32]byte → ..., bool
- for (data A, signature B, C and pubkey D, E) verify the signature of the data against the pubkey => {0 or 1}
- Cost: Secp256k1=1700; Secp256r1=2500
- Availability: v5
ECDSA¶
Curves
Index | Name | In | Notes |
---|---|---|---|
0 | Secp256k1 | secp256k1 curve, used in Bitcoin | |
1 | Secp256r1 | v7 | secp256r1 curve, NIST standard |
The 32 byte Y-component of a public key is the last element on the stack, preceded by X-component of a pubkey, preceded by S and R components of a signature, preceded by the data that is fifth element on the stack. All values are big-endian encoded. The signed data must be 32 bytes long, and signatures in lower-S form are only accepted.
ecdsa_pk_decompress¶
- Syntax:
ecdsa_pk_decompress V
where V: ECDSA - Bytecode: 0x06 {uint8}
- Stack: ..., A: [33]byte → ..., X: [32]byte, Y: [32]byte
- decompress pubkey A into components X, Y
- Cost: Secp256k1=650; Secp256r1=2400
- Availability: v5
The 33 byte public key in a compressed form to be decompressed into X and Y (top) components. All values are big-endian encoded.
ecdsa_pk_recover¶
- Syntax:
ecdsa_pk_recover V
where V: ECDSA - Bytecode: 0x07 {uint8}
- Stack: ..., A: [32]byte, B: uint64, C: [32]byte, D: [32]byte → ..., X: [32]byte, Y: [32]byte
- for (data A, recovery id B, signature C, D) recover a public key
- Cost: 2000
- Availability: v5
S (top) and R elements of a signature, recovery id and data (bottom) are expected on the stack and used to deriver a public key. All values are big-endian encoded. The signed data must be 32 bytes long.
+¶
- Bytecode: 0x08
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A plus B. Fail on overflow.
Overflow is an error condition which halts execution and fails the transaction. Full precision is available from addw
.
-¶
- Bytecode: 0x09
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A minus B. Fail if B > A.
/¶
- Bytecode: 0x0a
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A divided by B (truncated division). Fail if B == 0.
divmodw
is available to divide the two-element values produced by mulw
and addw
.
*¶
- Bytecode: 0x0b
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A times B. Fail on overflow.
Overflow is an error condition which halts execution and fails the transaction. Full precision is available from mulw
.
<¶
- Bytecode: 0x0c
- Stack: ..., A: uint64, B: uint64 → ..., bool
- A less than B => {0 or 1}
>¶
- Bytecode: 0x0d
- Stack: ..., A: uint64, B: uint64 → ..., bool
- A greater than B => {0 or 1}
<=¶
- Bytecode: 0x0e
- Stack: ..., A: uint64, B: uint64 → ..., bool
- A less than or equal to B => {0 or 1}
>=¶
- Bytecode: 0x0f
- Stack: ..., A: uint64, B: uint64 → ..., bool
- A greater than or equal to B => {0 or 1}
&&¶
- Bytecode: 0x10
- Stack: ..., A: uint64, B: uint64 → ..., bool
- A is not zero and B is not zero => {0 or 1}
||¶
- Bytecode: 0x11
- Stack: ..., A: uint64, B: uint64 → ..., bool
- A is not zero or B is not zero => {0 or 1}
==¶
- Bytecode: 0x12
- Stack: ..., A, B → ..., bool
- A is equal to B => {0 or 1}
!=¶
- Bytecode: 0x13
- Stack: ..., A, B → ..., bool
- A is not equal to B => {0 or 1}
!¶
- Bytecode: 0x14
- Stack: ..., A: uint64 → ..., uint64
- A == 0 yields 1; else 0
len¶
- Bytecode: 0x15
- Stack: ..., A: []byte → ..., uint64
- yields length of byte value A
itob¶
- Bytecode: 0x16
- Stack: ..., A: uint64 → ..., [8]byte
- converts uint64 A to big-endian byte array, always of length 8
btoi¶
- Bytecode: 0x17
- Stack: ..., A: []byte → ..., uint64
- converts big-endian byte array A to uint64. Fails if len(A) > 8. Padded by leading 0s if len(A) < 8.
btoi
fails if the input is longer than 8 bytes.
%¶
- Bytecode: 0x18
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A modulo B. Fail if B == 0.
|¶
- Bytecode: 0x19
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A bitwise-or B
&¶
- Bytecode: 0x1a
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A bitwise-and B
^¶
- Bytecode: 0x1b
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A bitwise-xor B
~¶
- Bytecode: 0x1c
- Stack: ..., A: uint64 → ..., uint64
- bitwise invert value A
mulw¶
- Bytecode: 0x1d
- Stack: ..., A: uint64, B: uint64 → ..., X: uint64, Y: uint64
- A times B as a 128-bit result in two uint64s. X is the high 64 bits, Y is the low
addw¶
- Bytecode: 0x1e
- Stack: ..., A: uint64, B: uint64 → ..., X: uint64, Y: uint64
- A plus B as a 128-bit result. X is the carry-bit, Y is the low-order 64 bits.
- Availability: v2
divmodw¶
- Bytecode: 0x1f
- Stack: ..., A: uint64, B: uint64, C: uint64, D: uint64 → ..., W: uint64, X: uint64, Y: uint64, Z: uint64
- W,X = (A,B / C,D); Y,Z = (A,B modulo C,D)
- Cost: 20
- Availability: v4
The notation J,K indicates that two uint64 values J and K are interpreted as a uint128 value, with J as the high uint64 and K the low.
intcblock¶
- Syntax:
intcblock UINT ...
where UINT ...: a block of int constant values - Bytecode: 0x20 {varuint count, [varuint ...]}
- Stack: ... → ...
- prepare block of uint64 constants for use by intc
intcblock
loads following program bytes into an array of integer constants in the evaluator. These integer constants can be referred to by intc
and intc_*
which will push the value onto the stack. Subsequent calls to intcblock
reset and replace the integer constants available to the script.
intc¶
- Syntax:
intc I
where I: an index in the intcblock - Bytecode: 0x21 {uint8}
- Stack: ... → ..., uint64
- Ith constant from intcblock
intc_0¶
- Bytecode: 0x22
- Stack: ... → ..., uint64
- constant 0 from intcblock
intc_1¶
- Bytecode: 0x23
- Stack: ... → ..., uint64
- constant 1 from intcblock
intc_2¶
- Bytecode: 0x24
- Stack: ... → ..., uint64
- constant 2 from intcblock
intc_3¶
- Bytecode: 0x25
- Stack: ... → ..., uint64
- constant 3 from intcblock
bytecblock¶
- Syntax:
bytecblock BYTES ...
where BYTES ...: a block of byte constant values - Bytecode: 0x26 {varuint count, [varuint length, bytes ...]}
- Stack: ... → ...
- prepare block of byte-array constants for use by bytec
bytecblock
loads the following program bytes into an array of byte-array constants in the evaluator. These constants can be referred to by bytec
and bytec_*
which will push the value onto the stack. Subsequent calls to bytecblock
reset and replace the bytes constants available to the script.
bytec¶
- Syntax:
bytec I
where I: an index in the bytecblock - Bytecode: 0x27 {uint8}
- Stack: ... → ..., []byte
- Ith constant from bytecblock
bytec_0¶
- Bytecode: 0x28
- Stack: ... → ..., []byte
- constant 0 from bytecblock
bytec_1¶
- Bytecode: 0x29
- Stack: ... → ..., []byte
- constant 1 from bytecblock
bytec_2¶
- Bytecode: 0x2a
- Stack: ... → ..., []byte
- constant 2 from bytecblock
bytec_3¶
- Bytecode: 0x2b
- Stack: ... → ..., []byte
- constant 3 from bytecblock
arg¶
- Syntax:
arg N
where N: an arg index - Bytecode: 0x2c {uint8}
- Stack: ... → ..., []byte
- Nth LogicSig argument
- Mode: Signature
arg_0¶
- Bytecode: 0x2d
- Stack: ... → ..., []byte
- LogicSig argument 0
- Mode: Signature
arg_1¶
- Bytecode: 0x2e
- Stack: ... → ..., []byte
- LogicSig argument 1
- Mode: Signature
arg_2¶
- Bytecode: 0x2f
- Stack: ... → ..., []byte
- LogicSig argument 2
- Mode: Signature
arg_3¶
- Bytecode: 0x30
- Stack: ... → ..., []byte
- LogicSig argument 3
- Mode: Signature
txn¶
- Syntax:
txn F
where F: txn - Bytecode: 0x31 {uint8}
- Stack: ... → ..., any
- field F of current transaction
txn¶
Fields (see transaction reference)
Index | Name | Type | In | Notes |
---|---|---|---|---|
0 | Sender | address | 32 byte address | |
1 | Fee | uint64 | microalgos | |
2 | FirstValid | uint64 | round number | |
3 | FirstValidTime | uint64 | v7 | UNIX timestamp of block before txn.FirstValid. Fails if negative |
4 | LastValid | uint64 | round number | |
5 | Note | []byte | Any data up to 1024 bytes | |
6 | Lease | [32]byte | 32 byte lease value | |
7 | Receiver | address | 32 byte address | |
8 | Amount | uint64 | microalgos | |
9 | CloseRemainderTo | address | 32 byte address | |
10 | VotePK | [32]byte | 32 byte address | |
11 | SelectionPK | [32]byte | 32 byte address | |
12 | VoteFirst | uint64 | The first round that the participation key is valid. | |
13 | VoteLast | uint64 | The last round that the participation key is valid. | |
14 | VoteKeyDilution | uint64 | Dilution for the 2-level participation key | |
15 | Type | []byte | Transaction type as bytes | |
16 | TypeEnum | uint64 | Transaction type as integer | |
17 | XferAsset | uint64 | Asset ID | |
18 | AssetAmount | uint64 | value in Asset's units | |
19 | AssetSender | address | 32 byte address. Source of assets if Sender is the Asset's Clawback address. | |
20 | AssetReceiver | address | 32 byte address | |
21 | AssetCloseTo | address | 32 byte address | |
22 | GroupIndex | uint64 | Position of this transaction within an atomic transaction group. A stand-alone transaction is implicitly element 0 in a group of 1 | |
23 | TxID | [32]byte | The computed ID for this transaction. 32 bytes. | |
24 | ApplicationID | uint64 | v2 | ApplicationID from ApplicationCall transaction |
25 | OnCompletion | uint64 | v2 | ApplicationCall transaction on completion action |
27 | NumAppArgs | uint64 | v2 | Number of ApplicationArgs |
29 | NumAccounts | uint64 | v2 | Number of Accounts |
30 | ApprovalProgram | []byte | v2 | Approval program |
31 | ClearStateProgram | []byte | v2 | Clear state program |
32 | RekeyTo | address | v2 | 32 byte Sender's new AuthAddr |
33 | ConfigAsset | uint64 | v2 | Asset ID in asset config transaction |
34 | ConfigAssetTotal | uint64 | v2 | Total number of units of this asset created |
35 | ConfigAssetDecimals | uint64 | v2 | Number of digits to display after the decimal place when displaying the asset |
36 | ConfigAssetDefaultFrozen | bool | v2 | Whether the asset's slots are frozen by default or not, 0 or 1 |
37 | ConfigAssetUnitName | []byte | v2 | Unit name of the asset |
38 | ConfigAssetName | []byte | v2 | The asset name |
39 | ConfigAssetURL | []byte | v2 | URL |
40 | ConfigAssetMetadataHash | [32]byte | v2 | 32 byte commitment to unspecified asset metadata |
41 | ConfigAssetManager | address | v2 | 32 byte address |
42 | ConfigAssetReserve | address | v2 | 32 byte address |
43 | ConfigAssetFreeze | address | v2 | 32 byte address |
44 | ConfigAssetClawback | address | v2 | 32 byte address |
45 | FreezeAsset | uint64 | v2 | Asset ID being frozen or un-frozen |
46 | FreezeAssetAccount | address | v2 | 32 byte address of the account whose asset slot is being frozen or un-frozen |
47 | FreezeAssetFrozen | bool | v2 | The new frozen value, 0 or 1 |
49 | NumAssets | uint64 | v3 | Number of Assets |
51 | NumApplications | uint64 | v3 | Number of Applications |
52 | GlobalNumUint | uint64 | v3 | Number of global state integers in ApplicationCall |
53 | GlobalNumByteSlice | uint64 | v3 | Number of global state byteslices in ApplicationCall |
54 | LocalNumUint | uint64 | v3 | Number of local state integers in ApplicationCall |
55 | LocalNumByteSlice | uint64 | v3 | Number of local state byteslices in ApplicationCall |
56 | ExtraProgramPages | uint64 | v4 | Number of additional pages for each of the application's approval and clear state programs. An ExtraProgramPages of 1 means 2048 more total bytes, or 1024 for each program. |
57 | Nonparticipation | bool | v5 | Marks an account nonparticipating for rewards |
59 | NumLogs | uint64 | v5 | Number of Logs (only with itxn in v5). Application mode only |
60 | CreatedAssetID | uint64 | v5 | Asset ID allocated by the creation of an ASA (only with itxn in v5). Application mode only |
61 | CreatedApplicationID | uint64 | v5 | ApplicationID allocated by the creation of an application (only with itxn in v5). Application mode only |
62 | LastLog | []byte | v6 | The last message emitted. Empty bytes if none were emitted. Application mode only |
63 | StateProofPK | []byte | v6 | 64 byte state proof public key |
65 | NumApprovalProgramPages | uint64 | v7 | Number of Approval Program pages |
67 | NumClearStateProgramPages | uint64 | v7 | Number of ClearState Program pages |
global¶
- Syntax:
global F
where F: global - Bytecode: 0x32 {uint8}
- Stack: ... → ..., any
- global field F
global¶
Fields
Index | Name | Type | In | Notes |
---|---|---|---|---|
0 | MinTxnFee | uint64 | microalgos | |
1 | MinBalance | uint64 | microalgos | |
2 | MaxTxnLife | uint64 | rounds | |
3 | ZeroAddress | address | 32 byte address of all zero bytes | |
4 | GroupSize | uint64 | Number of transactions in this atomic transaction group. At least 1 | |
5 | LogicSigVersion | uint64 | v2 | Maximum supported version |
6 | Round | uint64 | v2 | Current round number. Application mode only. |
7 | LatestTimestamp | uint64 | v2 | Last confirmed block UNIX timestamp. Fails if negative. Application mode only. |
8 | CurrentApplicationID | uint64 | v2 | ID of current application executing. Application mode only. |
9 | CreatorAddress | address | v3 | Address of the creator of the current application. Application mode only. |
10 | CurrentApplicationAddress | address | v5 | Address that the current application controls. Application mode only. |
11 | GroupID | [32]byte | v5 | ID of the transaction group. 32 zero bytes if the transaction is not part of a group. |
12 | OpcodeBudget | uint64 | v6 | The remaining cost that can be spent by opcodes in this program. |
13 | CallerApplicationID | uint64 | v6 | The application ID of the application that called this application. 0 if this application is at the top-level. Application mode only. |
14 | CallerApplicationAddress | address | v6 | The application address of the application that called this application. ZeroAddress if this application is at the top-level. Application mode only. |
gtxn¶
- Syntax:
gtxn T F
where T: transaction group index, F: txn - Bytecode: 0x33 {uint8}, {uint8}
- Stack: ... → ..., any
- field F of the Tth transaction in the current group
for notes on transaction fields available, see txn
. If this transaction is i in the group, gtxn i field
is equivalent to txn field
.
load¶
- Syntax:
load I
where I: position in scratch space to load from - Bytecode: 0x34 {uint8}
- Stack: ... → ..., any
- Ith scratch space value. All scratch spaces are 0 at program start.
store¶
- Syntax:
store I
where I: position in scratch space to store to - Bytecode: 0x35 {uint8}
- Stack: ..., A → ...
- store A to the Ith scratch space
txna¶
- Syntax:
txna F I
where F: txna, I: transaction field array index - Bytecode: 0x36 {uint8}, {uint8}
- Stack: ... → ..., any
- Ith value of the array field F of the current transaction
txna
can be called usingtxn
with 2 immediates. - Availability: v2
txna¶
Fields (see transaction reference)
Index | Name | Type | In | Notes |
---|---|---|---|---|
26 | ApplicationArgs | []byte | v2 | Arguments passed to the application in the ApplicationCall transaction |
28 | Accounts | address | v2 | Accounts listed in the ApplicationCall transaction |
48 | Assets | uint64 | v3 | Foreign Assets listed in the ApplicationCall transaction |
50 | Applications | uint64 | v3 | Foreign Apps listed in the ApplicationCall transaction |
58 | Logs | []byte | v5 | Log messages emitted by an application call (only with itxn in v5). Application mode only |
64 | ApprovalProgramPages | []byte | v7 | Approval Program as an array of pages |
66 | ClearStateProgramPages | []byte | v7 | ClearState Program as an array of pages |
gtxna¶
- Syntax:
gtxna T F I
where T: transaction group index, F: txna, I: transaction field array index - Bytecode: 0x37 {uint8}, {uint8}, {uint8}
- Stack: ... → ..., any
- Ith value of the array field F from the Tth transaction in the current group
gtxna
can be called usinggtxn
with 3 immediates. - Availability: v2
gtxns¶
- Syntax:
gtxns F
where F: txn - Bytecode: 0x38 {uint8}
- Stack: ..., A: uint64 → ..., any
- field F of the Ath transaction in the current group
- Availability: v3
for notes on transaction fields available, see txn
. If top of stack is i, gtxns field
is equivalent to gtxn _i_ field
. gtxns exists so that i can be calculated, often based on the index of the current transaction.
gtxnsa¶
- Syntax:
gtxnsa F I
where F: txna, I: transaction field array index - Bytecode: 0x39 {uint8}, {uint8}
- Stack: ..., A: uint64 → ..., any
- Ith value of the array field F from the Ath transaction in the current group
gtxnsa
can be called usinggtxns
with 2 immediates. - Availability: v3
gload¶
- Syntax:
gload T I
where T: transaction group index, I: position in scratch space to load from - Bytecode: 0x3a {uint8}, {uint8}
- Stack: ... → ..., any
- Ith scratch space value of the Tth transaction in the current group
- Availability: v4
- Mode: Application
gload
fails unless the requested transaction is an ApplicationCall and T < GroupIndex.
gloads¶
- Syntax:
gloads I
where I: position in scratch space to load from - Bytecode: 0x3b {uint8}
- Stack: ..., A: uint64 → ..., any
- Ith scratch space value of the Ath transaction in the current group
- Availability: v4
- Mode: Application
gloads
fails unless the requested transaction is an ApplicationCall and A < GroupIndex.
gaid¶
- Syntax:
gaid T
where T: transaction group index - Bytecode: 0x3c {uint8}
- Stack: ... → ..., uint64
- ID of the asset or application created in the Tth transaction of the current group
- Availability: v4
- Mode: Application
gaid
fails unless the requested transaction created an asset or application and T < GroupIndex.
gaids¶
- Bytecode: 0x3d
- Stack: ..., A: uint64 → ..., uint64
- ID of the asset or application created in the Ath transaction of the current group
- Availability: v4
- Mode: Application
gaids
fails unless the requested transaction created an asset or application and A < GroupIndex.
loads¶
- Bytecode: 0x3e
- Stack: ..., A: uint64 → ..., any
- Ath scratch space value. All scratch spaces are 0 at program start.
- Availability: v5
stores¶
- Bytecode: 0x3f
- Stack: ..., A: uint64, B → ...
- store B to the Ath scratch space
- Availability: v5
bnz¶
- Syntax:
bnz TARGET
where TARGET: branch offset - Bytecode: 0x40 {int16 (big-endian)}
- Stack: ..., A: uint64 → ...
- branch to TARGET if value A is not zero
The bnz
instruction opcode 0x40 is followed by two immediate data bytes which are a high byte first and low byte second which together form a 16 bit offset which the instruction may branch to. For a bnz instruction at pc
, if the last element of the stack is not zero then branch to instruction at pc + 3 + N
, else proceed to next instruction at pc + 3
. Branch targets must be aligned instructions. (e.g. Branching to the second byte of a 2 byte op will be rejected.) Starting at v4, the offset is treated as a signed 16 bit integer allowing for backward branches and looping. In prior version (v1 to v3), branch offsets are limited to forward branches only, 0-0x7fff.
At v2 it became allowed to branch to the end of the program exactly after the last instruction: bnz to byte N (with 0-indexing) was illegal for a TEAL program with N bytes before v2, and is legal after it. This change eliminates the need for a last instruction of no-op as a branch target at the end. (Branching beyond the end--in other words, to a byte larger than N--is still illegal and will cause the program to fail.)
bz¶
- Syntax:
bz TARGET
where TARGET: branch offset - Bytecode: 0x41 {int16 (big-endian)}
- Stack: ..., A: uint64 → ...
- branch to TARGET if value A is zero
- Availability: v2
See bnz
for details on how branches work. bz
inverts the behavior of bnz
.
b¶
- Syntax:
b TARGET
where TARGET: branch offset - Bytecode: 0x42 {int16 (big-endian)}
- Stack: ... → ...
- branch unconditionally to TARGET
- Availability: v2
See bnz
for details on how branches work. b
always jumps to the offset.
return¶
- Bytecode: 0x43
- Stack: ..., A: uint64 → exits
- use A as success value; end
- Availability: v2
assert¶
- Bytecode: 0x44
- Stack: ..., A: uint64 → ...
- immediately fail unless A is a non-zero number
- Availability: v3
bury¶
- Syntax:
bury N
where N: depth - Bytecode: 0x45 {uint8}
- Stack: ..., A → ...
- replace the Nth value from the top of the stack with A. bury 0 fails.
- Availability: v8
popn¶
- Syntax:
popn N
where N: stack depth - Bytecode: 0x46 {uint8}
- Stack: ..., [N items] → ...
- remove N values from the top of the stack
- Availability: v8
dupn¶
- Syntax:
dupn N
where N: copy count - Bytecode: 0x47 {uint8}
- Stack: ..., A → ..., A, [N copies of A]
- duplicate A, N times
- Availability: v8
pop¶
- Bytecode: 0x48
- Stack: ..., A → ...
- discard A
dup¶
- Bytecode: 0x49
- Stack: ..., A → ..., A, A
- duplicate A
dup2¶
- Bytecode: 0x4a
- Stack: ..., A, B → ..., A, B, A, B
- duplicate A and B
- Availability: v2
dig¶
- Syntax:
dig N
where N: depth - Bytecode: 0x4b {uint8}
- Stack: ..., A, [N items] → ..., A, [N items], A
- Nth value from the top of the stack. dig 0 is equivalent to dup
- Availability: v3
swap¶
- Bytecode: 0x4c
- Stack: ..., A, B → ..., B, A
- swaps A and B on stack
- Availability: v3
select¶
- Bytecode: 0x4d
- Stack: ..., A, B, C: uint64 → ..., A or B
- selects one of two values based on top-of-stack: B if C != 0, else A
- Availability: v3
cover¶
- Syntax:
cover N
where N: depth - Bytecode: 0x4e {uint8}
- Stack: ..., [N items], A → ..., A, [N items]
- remove top of stack, and place it deeper in the stack such that N elements are above it. Fails if stack depth <= N.
- Availability: v5
uncover¶
- Syntax:
uncover N
where N: depth - Bytecode: 0x4f {uint8}
- Stack: ..., A, [N items] → ..., [N items], A
- remove the value at depth N in the stack and shift above items down so the Nth deep value is on top of the stack. Fails if stack depth <= N.
- Availability: v5
concat¶
- Bytecode: 0x50
- Stack: ..., A: []byte, B: []byte → ..., []byte
- join A and B
- Availability: v2
concat
fails if the result would be greater than 4096 bytes.
substring¶
- Syntax:
substring S E
where S: start position, E: end position - Bytecode: 0x51 {uint8}, {uint8}
- Stack: ..., A: []byte → ..., []byte
- A range of bytes from A starting at S up to but not including E. If E < S, or either is larger than the array length, the program fails
- Availability: v2
substring3¶
- Bytecode: 0x52
- Stack: ..., A: []byte, B: uint64, C: uint64 → ..., []byte
- A range of bytes from A starting at B up to but not including C. If C < B, or either is larger than the array length, the program fails
- Availability: v2
getbit¶
- Bytecode: 0x53
- Stack: ..., A, B: uint64 → ..., uint64
- Bth bit of (byte-array or integer) A. If B is greater than or equal to the bit length of the value (8*byte length), the program fails
- Availability: v3
see explanation of bit ordering in setbit
setbit¶
- Bytecode: 0x54
- Stack: ..., A, B: uint64, C: uint64 → ..., any
- Copy of (byte-array or integer) A, with the Bth bit set to (0 or 1) C. If B is greater than or equal to the bit length of the value (8*byte length), the program fails
- Availability: v3
When A is a uint64, index 0 is the least significant bit. Setting bit 3 to 1 on the integer 0 yields 8, or 2^3. When A is a byte array, index 0 is the leftmost bit of the leftmost byte. Setting bits 0 through 11 to 1 in a 4-byte-array of 0s yields the byte array 0xfff00000. Setting bit 3 to 1 on the 1-byte-array 0x00 yields the byte array 0x10.
getbyte¶
- Bytecode: 0x55
- Stack: ..., A: []byte, B: uint64 → ..., uint64
- Bth byte of A, as an integer. If B is greater than or equal to the array length, the program fails
- Availability: v3
setbyte¶
- Bytecode: 0x56
- Stack: ..., A: []byte, B: uint64, C: uint64 → ..., []byte
- Copy of A with the Bth byte set to small integer (between 0..255) C. If B is greater than or equal to the array length, the program fails
- Availability: v3
extract¶
- Syntax:
extract S L
where S: start position, L: length - Bytecode: 0x57 {uint8}, {uint8}
- Stack: ..., A: []byte → ..., []byte
- A range of bytes from A starting at S up to but not including S+L. If L is 0, then extract to the end of the string. If S or S+L is larger than the array length, the program fails
- Availability: v5
extract3¶
- Bytecode: 0x58
- Stack: ..., A: []byte, B: uint64, C: uint64 → ..., []byte
- A range of bytes from A starting at B up to but not including B+C. If B+C is larger than the array length, the program fails
extract3
can be called usingextract
with no immediates. - Availability: v5
extract_uint16¶
- Bytecode: 0x59
- Stack: ..., A: []byte, B: uint64 → ..., uint64
- A uint16 formed from a range of big-endian bytes from A starting at B up to but not including B+2. If B+2 is larger than the array length, the program fails
- Availability: v5
extract_uint32¶
- Bytecode: 0x5a
- Stack: ..., A: []byte, B: uint64 → ..., uint64
- A uint32 formed from a range of big-endian bytes from A starting at B up to but not including B+4. If B+4 is larger than the array length, the program fails
- Availability: v5
extract_uint64¶
- Bytecode: 0x5b
- Stack: ..., A: []byte, B: uint64 → ..., uint64
- A uint64 formed from a range of big-endian bytes from A starting at B up to but not including B+8. If B+8 is larger than the array length, the program fails
- Availability: v5
replace2¶
- Syntax:
replace2 S
where S: start position - Bytecode: 0x5c {uint8}
- Stack: ..., A: []byte, B: []byte → ..., []byte
- Copy of A with the bytes starting at S replaced by the bytes of B. Fails if S+len(B) exceeds len(A)
replace2
can be called usingreplace
with 1 immediate. - Availability: v7
replace3¶
- Bytecode: 0x5d
- Stack: ..., A: []byte, B: uint64, C: []byte → ..., []byte
- Copy of A with the bytes starting at B replaced by the bytes of C. Fails if B+len(C) exceeds len(A)
replace3
can be called usingreplace
with no immediates. - Availability: v7
base64_decode¶
- Syntax:
base64_decode E
where E: base64 - Bytecode: 0x5e {uint8}
- Stack: ..., A: []byte → ..., []byte
- decode A which was base64-encoded using encoding E. Fail if A is not base64 encoded with encoding E
- Cost: 1 + 1 per 16 bytes of A
- Availability: v7
base64¶
Encodings
Index | Name | Notes |
---|---|---|
0 | URLEncoding | |
1 | StdEncoding |
Warning: Usage should be restricted to very rare use cases. In almost all cases, smart contracts should directly handle non-encoded byte-strings. This opcode should only be used in cases where base64 is the only available option, e.g. interoperability with a third-party that only signs base64 strings.
Decodes A using the base64 encoding E. Specify the encoding with an immediate arg either as URL and Filename Safe (URLEncoding
) or Standard (StdEncoding
). See RFC 4648 sections 4 and 5. It is assumed that the encoding ends with the exact number of =
padding characters as required by the RFC. When padding occurs, any unused pad bits in the encoding must be set to zero or the decoding will fail. The special cases of \n
and \r
are allowed but completely ignored. An error will result when attempting to decode a string with a character that is not in the encoding alphabet or not one of =
, \r
, or \n
.
json_ref¶
- Syntax:
json_ref R
where R: json_ref - Bytecode: 0x5f {uint8}
- Stack: ..., A: []byte, B: []byte → ..., any
- key B's value, of type R, from a valid utf-8 encoded json object A
- Cost: 25 + 2 per 7 bytes of A
- Availability: v7
json_ref¶
Types
Index | Name | Type | Notes |
---|---|---|---|
0 | JSONString | []byte | |
1 | JSONUint64 | uint64 | |
2 | JSONObject | []byte |
Warning: Usage should be restricted to very rare use cases, as JSON decoding is expensive and quite limited. In addition, JSON objects are large and not optimized for size.
Almost all smart contracts should use simpler and smaller methods (such as the ABI. This opcode should only be used in cases where JSON is only available option, e.g. when a third-party only signs JSON.
balance¶
- Bytecode: 0x60
- Stack: ..., A → ..., uint64
- balance for account A, in microalgos. The balance is observed after the effects of previous transactions in the group, and after the fee for the current transaction is deducted. Changes caused by inner transactions are observable immediately following
itxn_submit
- Availability: v2
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset). Return: value.
app_opted_in¶
- Bytecode: 0x61
- Stack: ..., A, B: uint64 → ..., bool
- 1 if account A is opted in to application B, else 0
- Availability: v2
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset). Return: 1 if opted in and 0 otherwise.
app_local_get¶
- Bytecode: 0x62
- Stack: ..., A, B: stateKey → ..., any
- local state of the key B in the current application in account A
- Availability: v2
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), state key. Return: value. The value is zero (of type uint64) if the key does not exist.
app_local_get_ex¶
- Bytecode: 0x63
- Stack: ..., A, B: uint64, C: stateKey → ..., X: any, Y: bool
- X is the local state of application B, key C in account A. Y is 1 if key existed, else 0
- Availability: v2
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset), state key. Return: did_exist flag (top of the stack, 1 if the application and key existed and 0 otherwise), value. The value is zero (of type uint64) if the key does not exist.
app_global_get¶
- Bytecode: 0x64
- Stack: ..., A: stateKey → ..., any
- global state of the key A in the current application
- Availability: v2
- Mode: Application
params: state key. Return: value. The value is zero (of type uint64) if the key does not exist.
app_global_get_ex¶
- Bytecode: 0x65
- Stack: ..., A: uint64, B: stateKey → ..., X: any, Y: bool
- X is the global state of application A, key B. Y is 1 if key existed, else 0
- Availability: v2
- Mode: Application
params: Txn.ForeignApps offset (or, since v4, an available application id), state key. Return: did_exist flag (top of the stack, 1 if the application and key existed and 0 otherwise), value. The value is zero (of type uint64) if the key does not exist.
app_local_put¶
- Bytecode: 0x66
- Stack: ..., A, B: stateKey, C → ...
- write C to key B in account A's local state of the current application
- Availability: v2
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), state key, value.
app_global_put¶
- Bytecode: 0x67
- Stack: ..., A: stateKey, B → ...
- write B to key A in the global state of the current application
- Availability: v2
- Mode: Application
app_local_del¶
- Bytecode: 0x68
- Stack: ..., A, B: stateKey → ...
- delete key B from account A's local state of the current application
- Availability: v2
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), state key.
Deleting a key which is already absent has no effect on the application local state. (In particular, it does not cause the program to fail.)
app_global_del¶
- Bytecode: 0x69
- Stack: ..., A: stateKey → ...
- delete key A from the global state of the current application
- Availability: v2
- Mode: Application
params: state key.
Deleting a key which is already absent has no effect on the application global state. (In particular, it does not cause the program to fail.)
asset_holding_get¶
- Syntax:
asset_holding_get F
where F: asset_holding - Bytecode: 0x70 {uint8}
- Stack: ..., A, B: uint64 → ..., X: any, Y: bool
- X is field F from account A's holding of asset B. Y is 1 if A is opted into B, else 0
- Availability: v2
- Mode: Application
asset_holding¶
Fields
Index | Name | Type | Notes |
---|---|---|---|
0 | AssetBalance | uint64 | Amount of the asset unit held by this account |
1 | AssetFrozen | bool | Is the asset frozen or not |
params: Txn.Accounts offset (or, since v4, an available address), asset id (or, since v4, a Txn.ForeignAssets offset). Return: did_exist flag (1 if the asset existed and 0 otherwise), value.
asset_params_get¶
- Syntax:
asset_params_get F
where F: asset_params - Bytecode: 0x71 {uint8}
- Stack: ..., A: uint64 → ..., X: any, Y: bool
- X is field F from asset A. Y is 1 if A exists, else 0
- Availability: v2
- Mode: Application
asset_params¶
Fields
Index | Name | Type | In | Notes |
---|---|---|---|---|
0 | AssetTotal | uint64 | Total number of units of this asset | |
1 | AssetDecimals | uint64 | See AssetParams.Decimals | |
2 | AssetDefaultFrozen | bool | Frozen by default or not | |
3 | AssetUnitName | []byte | Asset unit name | |
4 | AssetName | []byte | Asset name | |
5 | AssetURL | []byte | URL with additional info about the asset | |
6 | AssetMetadataHash | [32]byte | Arbitrary commitment | |
7 | AssetManager | address | Manager address | |
8 | AssetReserve | address | Reserve address | |
9 | AssetFreeze | address | Freeze address | |
10 | AssetClawback | address | Clawback address | |
11 | AssetCreator | address | v5 | Creator address |
params: Txn.ForeignAssets offset (or, since v4, an available asset id. Return: did_exist flag (1 if the asset existed and 0 otherwise), value.
app_params_get¶
- Syntax:
app_params_get F
where F: app_params - Bytecode: 0x72 {uint8}
- Stack: ..., A: uint64 → ..., X: any, Y: bool
- X is field F from app A. Y is 1 if A exists, else 0
- Availability: v5
- Mode: Application
app_params¶
Fields
Index | Name | Type | Notes |
---|---|---|---|
0 | AppApprovalProgram | []byte | Bytecode of Approval Program |
1 | AppClearStateProgram | []byte | Bytecode of Clear State Program |
2 | AppGlobalNumUint | uint64 | Number of uint64 values allowed in Global State |
3 | AppGlobalNumByteSlice | uint64 | Number of byte array values allowed in Global State |
4 | AppLocalNumUint | uint64 | Number of uint64 values allowed in Local State |
5 | AppLocalNumByteSlice | uint64 | Number of byte array values allowed in Local State |
6 | AppExtraProgramPages | uint64 | Number of Extra Program Pages of code space |
7 | AppCreator | address | Creator address |
8 | AppAddress | address | Address for which this application has authority |
params: Txn.ForeignApps offset or an available app id. Return: did_exist flag (1 if the application existed and 0 otherwise), value.
acct_params_get¶
- Syntax:
acct_params_get F
where F: acct_params - Bytecode: 0x73 {uint8}
- Stack: ..., A → ..., X: any, Y: bool
- X is field F from account A. Y is 1 if A owns positive algos, else 0
- Availability: v6
- Mode: Application
acct_params¶
Fields
Index | Name | Type | In | Notes |
---|---|---|---|---|
0 | AcctBalance | uint64 | Account balance in microalgos | |
1 | AcctMinBalance | uint64 | Minimum required balance for account, in microalgos | |
2 | AcctAuthAddr | address | Address the account is rekeyed to. | |
3 | AcctTotalNumUint | uint64 | v8 | The total number of uint64 values allocated by this account in Global and Local States. |
4 | AcctTotalNumByteSlice | uint64 | v8 | The total number of byte array values allocated by this account in Global and Local States. |
5 | AcctTotalExtraAppPages | uint64 | v8 | The number of extra app code pages used by this account. |
6 | AcctTotalAppsCreated | uint64 | v8 | The number of existing apps created by this account. |
7 | AcctTotalAppsOptedIn | uint64 | v8 | The number of apps this account is opted into. |
8 | AcctTotalAssetsCreated | uint64 | v8 | The number of existing ASAs created by this account. |
9 | AcctTotalAssets | uint64 | v8 | The numbers of ASAs held by this account (including ASAs this account created). |
10 | AcctTotalBoxes | uint64 | v8 | The number of existing boxes created by this account's app. |
11 | AcctTotalBoxBytes | uint64 | v8 | The total number of bytes used by this account's app's box keys and values. |
min_balance¶
- Bytecode: 0x78
- Stack: ..., A → ..., uint64
- minimum required balance for account A, in microalgos. Required balance is affected by ASA, App, and Box usage. When creating or opting into an app, the minimum balance grows before the app code runs, therefore the increase is visible there. When deleting or closing out, the minimum balance decreases after the app executes. Changes caused by inner transactions or box usage are observable immediately following the opcode effecting the change.
- Availability: v3
- Mode: Application
params: Txn.Accounts offset (or, since v4, an available account address), available application id (or, since v4, a Txn.ForeignApps offset). Return: value.
pushbytes¶
- Syntax:
pushbytes BYTES
where BYTES: a byte constant - Bytecode: 0x80 {varuint length, bytes}
- Stack: ... → ..., []byte
- immediate BYTES
- Availability: v3
pushbytes args are not added to the bytecblock during assembly processes
pushint¶
- Syntax:
pushint UINT
where UINT: an int constant - Bytecode: 0x81 {varuint}
- Stack: ... → ..., uint64
- immediate UINT
- Availability: v3
pushint args are not added to the intcblock during assembly processes
pushbytess¶
- Syntax:
pushbytess BYTES ...
where BYTES ...: a list of byte constants - Bytecode: 0x82 {varuint count, [varuint length, bytes ...]}
- Stack: ... → ..., [N items]
- push sequences of immediate byte arrays to stack (first byte array being deepest)
- Availability: v8
pushbytess args are not added to the bytecblock during assembly processes
pushints¶
- Syntax:
pushints UINT ...
where UINT ...: a list of int constants - Bytecode: 0x83 {varuint count, [varuint ...]}
- Stack: ... → ..., [N items]
- push sequence of immediate uints to stack in the order they appear (first uint being deepest)
- Availability: v8
pushints args are not added to the intcblock during assembly processes
ed25519verify_bare¶
- Bytecode: 0x84
- Stack: ..., A: []byte, B: [64]byte, C: [32]byte → ..., bool
- for (data A, signature B, pubkey C) verify the signature of the data against the pubkey => {0 or 1}
- Cost: 1900
- Availability: v7
callsub¶
- Syntax:
callsub TARGET
where TARGET: branch offset - Bytecode: 0x88 {int16 (big-endian)}
- Stack: ... → ...
- branch unconditionally to TARGET, saving the next instruction on the call stack
- Availability: v4
The call stack is separate from the data stack. Only callsub
, retsub
, and proto
manipulate it.
retsub¶
- Bytecode: 0x89
- Stack: ... → ...
- pop the top instruction from the call stack and branch to it
- Availability: v4
If the current frame was prepared by proto A R
, retsub
will remove the 'A' arguments from the stack, move the R
return values down, and pop any stack locations above the relocated return values.
proto¶
- Syntax:
proto A R
where A: number of arguments, R: number of return values - Bytecode: 0x8a {uint8}, {uint8}
- Stack: ... → ...
- Prepare top call frame for a retsub that will assume A args and R return values.
- Availability: v8
Fails unless the last instruction executed was a callsub
.
frame_dig¶
- Syntax:
frame_dig I
where I: frame slot - Bytecode: 0x8b {int8}
- Stack: ... → ..., any
- Nth (signed) value from the frame pointer.
- Availability: v8
frame_bury¶
- Syntax:
frame_bury I
where I: frame slot - Bytecode: 0x8c {int8}
- Stack: ..., A → ...
- replace the Nth (signed) value from the frame pointer in the stack with A
- Availability: v8
switch¶
- Syntax:
switch TARGET ...
where TARGET ...: list of labels - Bytecode: 0x8d {varuint count, [int16 (big-endian) ...]}
- Stack: ..., A: uint64 → ...
- branch to the Ath label. Continue at following instruction if index A exceeds the number of labels.
- Availability: v8
match¶
- Syntax:
match TARGET ...
where TARGET ...: list of labels - Bytecode: 0x8e {varuint count, [int16 (big-endian) ...]}
- Stack: ..., [A1, A2, ..., AN], B → ...
- given match cases from A[1] to A[N], branch to the Ith label where A[I] = B. Continue to the following instruction if no matches are found.
- Availability: v8
match
consumes N+1 values from the stack. Let the top stack value be B. The following N values represent an ordered list of match cases/constants (A), where the first value (A[0]) is the deepest in the stack. The immediate arguments are an ordered list of N labels (T). match
will branch to target T[I], where A[I] = B. If there are no matches then execution continues on to the next instruction.
shl¶
- Bytecode: 0x90
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A times 2^B, modulo 2^64
- Availability: v4
shr¶
- Bytecode: 0x91
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A divided by 2^B
- Availability: v4
sqrt¶
- Bytecode: 0x92
- Stack: ..., A: uint64 → ..., uint64
- The largest integer I such that I^2 <= A
- Cost: 4
- Availability: v4
bitlen¶
- Bytecode: 0x93
- Stack: ..., A → ..., uint64
- The highest set bit in A. If A is a byte-array, it is interpreted as a big-endian unsigned integer. bitlen of 0 is 0, bitlen of 8 is 4
- Availability: v4
bitlen interprets arrays as big-endian integers, unlike setbit/getbit
exp¶
- Bytecode: 0x94
- Stack: ..., A: uint64, B: uint64 → ..., uint64
- A raised to the Bth power. Fail if A == B == 0 and on overflow
- Availability: v4
expw¶
- Bytecode: 0x95
- Stack: ..., A: uint64, B: uint64 → ..., X: uint64, Y: uint64
- A raised to the Bth power as a 128-bit result in two uint64s. X is the high 64 bits, Y is the low. Fail if A == B == 0 or if the results exceeds 2^128-1
- Cost: 10
- Availability: v4
bsqrt¶
- Bytecode: 0x96
- Stack: ..., A: bigint → ..., bigint
- The largest integer I such that I^2 <= A. A and I are interpreted as big-endian unsigned integers
- Cost: 40
- Availability: v6
divw¶
- Bytecode: 0x97
- Stack: ..., A: uint64, B: uint64, C: uint64 → ..., uint64
- A,B / C. Fail if C == 0 or if result overflows.
- Availability: v6
The notation A,B indicates that A and B are interpreted as a uint128 value, with A as the high uint64 and B the low.
sha3_256¶
- Bytecode: 0x98
- Stack: ..., A: []byte → ..., [32]byte
- SHA3_256 hash of value A, yields [32]byte
- Cost: 130
- Availability: v7
b+¶
- Bytecode: 0xa0
- Stack: ..., A: bigint, B: bigint → ..., []byte
- A plus B. A and B are interpreted as big-endian unsigned integers
- Cost: 10
- Availability: v4
b-¶
- Bytecode: 0xa1
- Stack: ..., A: bigint, B: bigint → ..., bigint
- A minus B. A and B are interpreted as big-endian unsigned integers. Fail on underflow.
- Cost: 10
- Availability: v4
b/¶
- Bytecode: 0xa2
- Stack: ..., A: bigint, B: bigint → ..., bigint
- A divided by B (truncated division). A and B are interpreted as big-endian unsigned integers. Fail if B is zero.
- Cost: 20
- Availability: v4
b*¶
- Bytecode: 0xa3
- Stack: ..., A: bigint, B: bigint → ..., []byte
- A times B. A and B are interpreted as big-endian unsigned integers.
- Cost: 20
- Availability: v4
b<¶
- Bytecode: 0xa4
- Stack: ..., A: bigint, B: bigint → ..., bool
- 1 if A is less than B, else 0. A and B are interpreted as big-endian unsigned integers
- Availability: v4
b>¶
- Bytecode: 0xa5
- Stack: ..., A: bigint, B: bigint → ..., bool
- 1 if A is greater than B, else 0. A and B are interpreted as big-endian unsigned integers
- Availability: v4
b<=¶
- Bytecode: 0xa6
- Stack: ..., A: bigint, B: bigint → ..., bool
- 1 if A is less than or equal to B, else 0. A and B are interpreted as big-endian unsigned integers
- Availability: v4
b>=¶
- Bytecode: 0xa7
- Stack: ..., A: bigint, B: bigint → ..., bool
- 1 if A is greater than or equal to B, else 0. A and B are interpreted as big-endian unsigned integers
- Availability: v4
b==¶
- Bytecode: 0xa8
- Stack: ..., A: bigint, B: bigint → ..., bool
- 1 if A is equal to B, else 0. A and B are interpreted as big-endian unsigned integers
- Availability: v4
b!=¶
- Bytecode: 0xa9
- Stack: ..., A: bigint, B: bigint → ..., bool
- 0 if A is equal to B, else 1. A and B are interpreted as big-endian unsigned integers
- Availability: v4
b%¶
- Bytecode: 0xaa
- Stack: ..., A: bigint, B: bigint → ..., bigint
- A modulo B. A and B are interpreted as big-endian unsigned integers. Fail if B is zero.
- Cost: 20
- Availability: v4
b|¶
- Bytecode: 0xab
- Stack: ..., A: []byte, B: []byte → ..., []byte
- A bitwise-or B. A and B are zero-left extended to the greater of their lengths
- Cost: 6
- Availability: v4
b&¶
- Bytecode: 0xac
- Stack: ..., A: []byte, B: []byte → ..., []byte
- A bitwise-and B. A and B are zero-left extended to the greater of their lengths
- Cost: 6
- Availability: v4
b^¶
- Bytecode: 0xad
- Stack: ..., A: []byte, B: []byte → ..., []byte
- A bitwise-xor B. A and B are zero-left extended to the greater of their lengths
- Cost: 6
- Availability: v4
b~¶
- Bytecode: 0xae
- Stack: ..., A: []byte → ..., []byte
- A with all bits inverted
- Cost: 4
- Availability: v4
bzero¶
- Bytecode: 0xaf
- Stack: ..., A: uint64 → ..., []byte
- zero filled byte-array of length A
- Availability: v4
log¶
- Bytecode: 0xb0
- Stack: ..., A: []byte → ...
- write A to log state of the current application
- Availability: v5
- Mode: Application
log
fails if called more than MaxLogCalls times in a program, or if the sum of logged bytes exceeds 1024 bytes.
itxn_begin¶
- Bytecode: 0xb1
- Stack: ... → ...
- begin preparation of a new inner transaction in a new transaction group
- Availability: v5
- Mode: Application
itxn_begin
initializes Sender to the application address; Fee to the minimum allowable, taking into account MinTxnFee and credit from overpaying in earlier transactions; FirstValid/LastValid to the values in the invoking transaction, and all other fields to zero or empty values.
itxn_field¶
- Syntax:
itxn_field F
where F: txn - Bytecode: 0xb2 {uint8}
- Stack: ..., A → ...
- set field F of the current inner transaction to A
- Availability: v5
- Mode: Application
itxn_field
fails if A is of the wrong type for F, including a byte array of the wrong size for use as an address when F is an address field. itxn_field
also fails if A is an account, asset, or app that is not available, or an attempt is made extend an array field beyond the limit imposed by consensus parameters. (Addresses set into asset params of acfg transactions need not be available.)
itxn_submit¶
- Bytecode: 0xb3
- Stack: ... → ...
- execute the current inner transaction group. Fail if executing this group would exceed the inner transaction limit, or if any transaction in the group fails.
- Availability: v5
- Mode: Application
itxn_submit
resets the current transaction so that it can not be resubmitted. A new itxn_begin
is required to prepare another inner transaction.
itxn¶
- Syntax:
itxn F
where F: txn - Bytecode: 0xb4 {uint8}
- Stack: ... → ..., any
- field F of the last inner transaction
- Availability: v5
- Mode: Application
itxna¶
- Syntax:
itxna F I
where F: txna, I: a transaction field array index - Bytecode: 0xb5 {uint8}, {uint8}
- Stack: ... → ..., any
- Ith value of the array field F of the last inner transaction
- Availability: v5
- Mode: Application
itxn_next¶
- Bytecode: 0xb6
- Stack: ... → ...
- begin preparation of a new inner transaction in the same transaction group
- Availability: v6
- Mode: Application
itxn_next
initializes the transaction exactly as itxn_begin
does
gitxn¶
- Syntax:
gitxn T F
where T: transaction group index, F: txn - Bytecode: 0xb7 {uint8}, {uint8}
- Stack: ... → ..., any
- field F of the Tth transaction in the last inner group submitted
- Availability: v6
- Mode: Application
gitxna¶
- Syntax:
gitxna T F I
where T: transaction group index, F: txna, I: transaction field array index - Bytecode: 0xb8 {uint8}, {uint8}, {uint8}
- Stack: ... → ..., any
- Ith value of the array field F from the Tth transaction in the last inner group submitted
- Availability: v6
- Mode: Application
box_create¶
- Bytecode: 0xb9
- Stack: ..., A: boxName, B: uint64 → ..., bool
- create a box named A, of length B. Fail if the name A is empty or B exceeds 32,768. Returns 0 if A already existed, else 1
- Availability: v8
- Mode: Application
Newly created boxes are filled with 0 bytes. box_create
will fail if the referenced box already exists with a different size. Otherwise, existing boxes are unchanged by box_create
.
box_extract¶
- Bytecode: 0xba
- Stack: ..., A: boxName, B: uint64, C: uint64 → ..., []byte
- read C bytes from box A, starting at offset B. Fail if A does not exist, or the byte range is outside A's size.
- Availability: v8
- Mode: Application
box_replace¶
- Bytecode: 0xbb
- Stack: ..., A: boxName, B: uint64, C: []byte → ...
- write byte-array C into box A, starting at offset B. Fail if A does not exist, or the byte range is outside A's size.
- Availability: v8
- Mode: Application
box_del¶
- Bytecode: 0xbc
- Stack: ..., A: boxName → ..., bool
- delete box named A if it exists. Return 1 if A existed, 0 otherwise
- Availability: v8
- Mode: Application
box_len¶
- Bytecode: 0xbd
- Stack: ..., A: boxName → ..., X: uint64, Y: bool
- X is the length of box A if A exists, else 0. Y is 1 if A exists, else 0.
- Availability: v8
- Mode: Application
box_get¶
- Bytecode: 0xbe
- Stack: ..., A: boxName → ..., X: []byte, Y: bool
- X is the contents of box A if A exists, else ''. Y is 1 if A exists, else 0.
- Availability: v8
- Mode: Application
For boxes that exceed 4,096 bytes, consider box_create
, box_extract
, and box_replace
box_put¶
- Bytecode: 0xbf
- Stack: ..., A: boxName, B: []byte → ...
- replaces the contents of box A with byte-array B. Fails if A exists and len(B) != len(box A). Creates A if it does not exist
- Availability: v8
- Mode: Application
For boxes that exceed 4,096 bytes, consider box_create
, box_extract
, and box_replace
txnas¶
- Syntax:
txnas F
where F: txna - Bytecode: 0xc0 {uint8}
- Stack: ..., A: uint64 → ..., any
- Ath value of the array field F of the current transaction
- Availability: v5
gtxnas¶
- Syntax:
gtxnas T F
where T: transaction group index, F: txna - Bytecode: 0xc1 {uint8}, {uint8}
- Stack: ..., A: uint64 → ..., any
- Ath value of the array field F from the Tth transaction in the current group
- Availability: v5
gtxnsas¶
- Syntax:
gtxnsas F
where F: txna - Bytecode: 0xc2 {uint8}
- Stack: ..., A: uint64, B: uint64 → ..., any
- Bth value of the array field F from the Ath transaction in the current group
- Availability: v5
args¶
- Bytecode: 0xc3
- Stack: ..., A: uint64 → ..., []byte
- Ath LogicSig argument
- Availability: v5
- Mode: Signature
gloadss¶
- Bytecode: 0xc4
- Stack: ..., A: uint64, B: uint64 → ..., any
- Bth scratch space value of the Ath transaction in the current group
- Availability: v6
- Mode: Application
itxnas¶
- Syntax:
itxnas F
where F: txna - Bytecode: 0xc5 {uint8}
- Stack: ..., A: uint64 → ..., any
- Ath value of the array field F of the last inner transaction
- Availability: v6
- Mode: Application
gitxnas¶
- Syntax:
gitxnas T F
where T: transaction group index, F: txna - Bytecode: 0xc6 {uint8}, {uint8}
- Stack: ..., A: uint64 → ..., any
- Ath value of the array field F from the Tth transaction in the last inner group submitted
- Availability: v6
- Mode: Application
vrf_verify¶
- Syntax:
vrf_verify S
where S: vrf_verify - Bytecode: 0xd0 {uint8}
- Stack: ..., A: []byte, B: [80]byte, C: [32]byte → ..., X: [64]byte, Y: bool
- Verify the proof B of message A against pubkey C. Returns vrf output and verification flag.
- Cost: 5700
- Availability: v7
vrf_verify¶
Standards
Index | Name | Notes |
---|---|---|
0 | VrfAlgorand |
VrfAlgorand
is the VRF used in Algorand. It is ECVRF-ED25519-SHA512-Elligator2, specified in the IETF internet draft draft-irtf-cfrg-vrf-03.
block¶
- Syntax:
block F
where F: block - Bytecode: 0xd1 {uint8}
- Stack: ..., A: uint64 → ..., any
- field F of block A. Fail unless A falls between txn.LastValid-1002 and txn.FirstValid (exclusive)
- Availability: v7
block¶
Fields
Index | Name | Type | Notes |
---|---|---|---|
0 | BlkSeed | []byte | |
1 | BlkTimestamp | uint64 |